ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw

ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw
Click to enlarge

Overview

Tough, powerful pipe-cutting chain saw that cuts up to full length of its guide bar (up to 25", depending on guidebar), reducing excavation and increasing safety. External pneumatic power pack (sold separately) reduces saw noise and fumes, letting you cut in trenches and other areas with poor ventilation

The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw comes with
either one 15" or 20" guidebar and ProForce chain, designed for general purpose cutting in stone, medium or hard concrete, and reinforced concete with light or heavy reinforcement; or one 15" guidebar and PowerGrit chain, which is designed for ductile iron pipe, cast iron pipe, PVC pipe, HDPE pipe, and Insituform pipe lining.

Financing available ($1,000 minimum purchase)

Price: $0.00

Purchase

Description

ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw

The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw is tough and powerful and designed to cut everything from ductile iron, cast iron, HDPE, PVC, and Insituform lining to stone, brick, reinforced concrete (depending on the chain).

The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw is also safer than other saws because it can cut up to the full length of its guide bar (up to 25"), so you can cut pipe with less excavation and greater safety. Not only that, but its external pneumatic power pack (sold separately) also reduces fumes and emissions so you can cut safely in confined areas like trenches.

 



ICS's PowerGrit diamond chain is designed for ductile iron pipe,
PVC pipe, cast iron pipe, HDPE pipe and Insituform pipe lining.

The ICS 890PG Ductile Iron Pipe-Cutting Hydraulic Chain Saw comes with one 15" or 20" guidebar and PowerGrit chain for ductile iron pipe, cast iron pipe, PVC pipe, HDPE pipe and Insituform pipe lining; or one  15" guidebar and ProForce chain for stone, medium and hard concrete, and concrete with light or heavy reinforcement.

For more chains and guidebars, visit our ICS chain saw chains page and ICS chain saw guidebars page.

You need a separate pneumatic power pack and hoses in order to use the ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw!

ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw Benefits

  • Deeper Cuts: The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw can cut up to the full length of its guide bar (up to 25"), which can reduce excavation needed to cut buried pipe and increase your safety. This is up to three times the cutting depth of rotary saws of the same size.
  • Safer: The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw's external hydraulic power pack (sold separately) reduces emissions and noise. This makes it ideal for cutting in confined cutting sites like trenches.
  • Durable: The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw's body is made of die cast aluminum.
  • Powerful: The ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw has the power you need to cut even the hardest materials.

ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw Specifications

  • Weight: 29 pounds (without bar and chain)
  • Bar Length: Up to 25"
  • Horsepower: 6.5 HP
  • Air Supply: 90 PSI (6.2 bar)
  • Powerhead: 20" X 10.5" X 12"
  • Guaranteed Sound Power Level: 113 dB
  • Vibration Level (Concrete-Cutting): 5.09 m/s2 at front handle, 5.07 m/s2 at rear handle
  • Vibration Level (Pipe-Cutting): 4.58 m/s2 at front handle, 4.43 m/s2 at rear handle
  • Water Supply: Minimum 20 PSI (1.4 bar), 2 gpm (7.6 lpm)

Hydraulic Power Packs and Hoses Sold Separately

ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw Are Designed For:

  • Pipe cutting.
  • Underground utility work.
  • Cutting up to 25" deep in one pass.
  • Areas where air quality is a concern (indoors, sewers, trenches, etc.).
  • Areas where noise is a concern (indoors, residential areas, etc.).

Who Uses the ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw?

  • Underground utility and water contractors.
  • Concrete contractors.
  • Underwater cutting applications.
  • Professional concrete cutters.
  • Demolition companies.

Available ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw Chains

  • PowerGrit: Ductile iron, cast iron, PVC, HDPE, Insituform pipe lining.
  • ProFORCE: Natural stone, medium or hard concrete, concrete with light or heavy reinforcement.
  • ProFORCE L: Natural stone, medium or hard concrete, concrete with light or heavy reinforcement. Longer lasting
  • ProFORCE S: Medium or hard concrete, concrete with light or heavy reinforcement. Faster cutting speed.
  • ProFORCE Abrasive: Soft or abrasive materials, soft stone, brick.
Tough and powerful, the ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw is powered by a separate pneumatic power pack. Since it generates less fumes at the cutting site, it's ideal for cutting in confined spaces like trenches.

Tough and powerful, the ICS 701-A Ductile Iron Pipe-Cutting Pneumatic Chain Saw is powered by a separate pneumatic power pack. Since it generates less fumes at the cutting site, it's ideal for cutting in confined spaces like trenches.

Product Reviews

Login or Register to write the first review.

Comment on Facebook

spc