Husqvarna K760 Cut-n-Break Gas Saw

Husqvarna K760 Cut-n-Break Gas Saw
Click to enlarge

More images

  • Financing Available on Husqvarna K760 Cut-n-Break Gas Saws!
Click to enlarge

Overview

Husqvarna saw step cuts trenches and grooves up to 16" deep for pipes, conduits, fiber optic and IT cabling, expansion joints, crack control, doors, and windows.

The Husqvarna K760 Cut-n-Break Gas Saw uses special twin 9" wet-cutting blades for cutting in concrete floors and slabs, pavers, block, stone, brick, masonry, and other building material.

Special saw pricing contingent on minimum additional purchase of (1) or more sets of Cut-N-Break saw blades at LIST PRICE.

Financing available ($1,000 minimum purchase)

Sale Price: $1,722.00
Compared at: $1,968.00
You Save: $246.00

Purchase

Description

Husqvarna K760 Cut-n-Break Gas Saw

The Husqvarna K760 Cut-n-Break Gas Saw is a cutting power tool designed for step cutting trenches and grooves for pipes, conduits, fiber optic and IT cabling, expansion joints, crack control, doors and windows in concrete floors and slabs, pavers, block, stone, brick, masonry and other building material. It's also the perfect cutting power tool for flush cutting. Designed to avoid corner overcutting on smaller jobs.

The Husqvarna K760 Cut-n-Break Gas Saw uses special twin 9" wet-cutting blades for cutting in concrete floors and slabs, stone, brick, masonry and other building material.

cutting with the husqvarna k760 cut n break saw illustration

1. Cut up to 2-1/2" and 3/4" wide with each pass.
2. Note that the saw's twin blades leave a core in the cut.
3. Break off the core with the included breaking tool.
4. Continue cutting in the cleared cut.

Repeat this process until the cut is up to 16" deep!

Husqvarna K760 Cut-n-Break Gas Saw Benefits

  • Designed for Speed and Convenience: The Husqvarna K760 Cut-n-Break Gas Saw's twin 9" blade system gives you high cutting speed and power.
  • More Power With Less Fumes and Fuel: The Husqvarna K760 Cut-n-Break Gas Saw's X-Torq engine increases power while reducing emissions by 75% and fuel consumption by 20%. SmartCarb maintains high engine power while further lowering fuel consumption.
  • Increased Life: With the Husqvarna K760 Cut-n-Break Gas Saw's three-filter Active Air Filtration and dust-sealed Dura-Starter.
  • Easy to Start: With the Husqvarna K760 Cut-n-Break Gas Saw's decompression valve.

Husqvarna K760 Cut-n-Break Gas Saw Specifications

  • Weight Without Fuel and Cutting Equipment: 23.3 pounds
  • Cutting Depth: 16"
  • Horsepower: 5 HP
  • Engine: 2-stroke, air cooled
  • Displacement: 73.4 cc
  • Vibration Level: 3.2 m/s2 (front handle), 5.7 m/s2 (rear handle)
  • Fuel Capacity: 0.24 gal
  • Wet/Dry Cutting: Designed for wet cutting only

Husqvarna K760 Cut-n-Break Gas Saws Are Designed For:

  • Cutting trenches and grooves for pipes, conduits, fiber optic and IT cabling, expansion joints, and crack control.
  • Cutting openings for doors and windows.
  • Concrete.
  • Pavers.
  • Block
  • Stone.
  • Brick.
  • Masonry.

Who Uses Husqvarna K760 Cut-n-Break Gas Saws?

  • Construction and building contractors.
  • Underground contractors.
  • Water, sewage and electrical utilities.
  • Cable, phone and communications companies.
Blade Stone Soft
Concrete
Medium
Concrete
Hard
Concrete
Building
Brick
Abrasive
Building Block
EL10CnB This Husqvarna K760 Cut-n-Break Gas Saw blade is good for stone. This Husqvarna K760 Cut-n-Break Gas Saw blade is good for soft concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for medium concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for hard concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for cutting building brick. This Husqvarna K760 Cut-n-Break Gas Saw blade is acceptable for abrasive building block.
EL35CnB This Husqvarna K760 Cut-n-Break Gas Saw blade is good for stone. This Husqvarna K760 Cut-n-Break Gas Saw blade is good for soft concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for medium concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for hard concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for hard concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is acceptable for abrasive building block.
EL70CnB
This Husqvarna K760 Cut-n-Break Gas Saw blade is good for medium concrete. This Husqvarna K760 Cut-n-Break Gas Saw blade is acceptable for hard concrete.
This Husqvarna K760 Cut-n-Break Gas Saw blade is optimal for abrasive building block.
Optimal Use=Optimal Use
 Good Use=Good Use  Acceptable Use=Acceptable Use

Product Reviews

Login or Register to write the first review.

Comment on Facebook

spc