Safety Blade Grinder Cutter Specifications

Grinds and cuts all steel and metallic products.
Emits 90% less sparks than abrasive wheels and no hazardous silicon carbide dust.
When one side wears out, simply flip it over and continue working.
#1 choice of water departments and underground utilities in the USA and Canada.

 

Safety Blade Grinder Cutter Specifications

 

Uses:

Materials:





Wet/Dry:

Air Flow Technology:



Weld:

Diamond Percentage:

Warranty:
Grinding, cutting

Ductile, cast, gray and angle iron; bronze; copper; chrome; zinc; lead; high nickel content materials; refractory brick; braces; flat stock; rebar; ductile and cast iron pipe; cured and green concrete; asphalt; brick; block; stone; PVC; HDPE; RCP; clay and ceramic pipe; galvanized; stainless and carbon steel; welding slag; and solid and tube plastic.

Dry grinding, can be used for wet grindng.

Cooling technology on 5" and larger sizes, developed by Desert Diamond Industries that allows our wheels to grind on red-hot steel without warping or wobbling. (4" and 4.5" do not have Air Flow Technology)

No weld. Wheel is solid steel, eliminating shattering.

85% on cutting/grinding surface.

Life Time Operator Error Warranty against breakage, warping and wobbling, as well as any damage to the blade caused by the operator (i.e. dropping the saw, bending or pinching blade in cut, damage in storage, etc.)

 

Safety Blade Grinder Cutter Data Specs

Part Number Diameter Cutting Edge Width Arbor Size RPM Range Equipment
VBFC-4
VBFC-4.5
VBFC-5AIR
VBFC-6AIR
VBFC-7AIR
VBFC-9AIR
VBFC-9x1-Wrap
4"
4.5"
5"
6"
7"
9"
9"
.100
.100
.100
.120
.140
.160
.160
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
5/8-7/8 or 5/8-11 thread
8,000 - 13,300
8,000 - 13,300
7,200 - 12,000
6,000 - 10,100
5,100 - 8,700
4,000 - 6,700
4,000 - 6,700
Angle GrindersAngle grinders

* All wheels can be machined to fit any tool requested.

spc