Ductile Iron Safety Blade Specifications Data

#1 choice of water departments and underground utilities in the USA and Canada.
Trusted by firefighters and RIT teams. Cuts almost anything, including ductile iron.
Made of solid steel (up to 14"), so it won't shatter or lose segments.

 

Ductile Iron Safety Blade Specifications

 

Uses:

Materials:






Air Flow Technology:


Electroplating:

Segment Weld:


Diamond Content:

Segment Height:

Wet/Dry Cutting:

Warranty:
Cutting, beveling and smoothing

Ductile, cast, grey, angle and black iron; stainless, carbon, hardened, mild and galvanized steel; non-ferrous materials like bronze, copper, chrome, zinc and lead; high nickel-content materials; Hastelloy "superalloys"; schedule 40 and 80 steel pipe; PVC; HDPE; RCP; clay and ceramic pipe; cured, green and reinforced concrete; asphalt; brick; block; stone; granite; pavers; ceramic tile; wood; plywood; 2x4s; and more

Cooling technology developed by Desert Diamond Industries that allows our blades to cut on red-hot steel without warping or wobbling

Electroplated swirl design prevents binding and pinching

No weld. Blade is solid steel. Eliminating welds eliminates segment loss and increases safety.

0.315" (8mm) vacuum-brazed diamond cutting edge

85% on the cutting edge

Dry cutting, can be used for wet cutting

Life Time Operator Error Warranty against breakage, warping and wobbling, as well as any damage to the blade caused by the operator (i.e. dropping the saw, bending or pinching blade in cut, damage in storage, etc.)

 

Ductile Iron Safety Blade Data Specs

Part Number Diameter Thickness Arbor Size RPM Range Equipment
103-4.5S
103-4.5T
103-5S
103-5T
103-6S
103-6w
4.5"
4.5"
5"
5"
6"
6"
0.085"
0.050"
0.085"
0.050"
0.102"
0.102"
5/8-7/8
5/8-7/8
5/8-7/8
5/8-7/8
5/8-7/8
5/8-7/8
8,000 - 13,300
8,000 - 13,300
7,200 - 12,000
7,200 - 12,000
6,000 - 10,100
6,000 - 10,100
Angle Grinders Reed UPC universal pipe cutter wachs trav-l cutter Angle grinders, Reed UPC, Wachs Trav-L-Cutter and UPC, Wheeler Rex
103-7S
103-7T
7"
7"
0.102"
0.095"
5/8-7/8-DM
5/8-7/8-DM
5,100 - 8,700
5,100 - 8,700
Angle Grinders wachs trav-l cutter Skil Saws Angle grinders, Wachs Trav-L-Cutter, Skil saws
103-8S
103-9S
103-10S
8"
9"
10"
0.102"
0.110"
0.118"
5/8-7/8
5/8-7/8
5/8-7/8
4,500 - 7,600
4,000 - 6,700
3,600 - 6,000
Angle Grinders wachs trav-l cutter Angle grinders, Wachs Trav-L-Cutter
103-12A
103-12B
103-14A
103-14B
12"
12"
14"
14"
0.125"
0.125"
0.125"
0.125"
1"-20mm
20mm
1"-20mm
20mm
3,000 - 6,300
3,000 - 6,300
2,500 - 5,400
2,500 - 5,400
Hand-held Saws Chop Saws Table Saws Handheld, hot, chop and table saws
103-16A
103-16B
16"
16"
0.125"
0.125"
1"-20mm
20mm
2,200 - 4,500
2,200 - 4,500
Chop Saws Table Saws Hot, chop and table saws
103-16A
103-16B
16"
16"
0.125"
0.125"
1"-20mm
20mm
2,200 - 4,700
2,200 - 4,700
Hand-held Saws  Handheld saws
103-18
103-20
103-24
18"
20"
24"
0.135"
0.155"
0.165"
1"
1"
1"
2,000 - 3,300
1,800 - 3,000
1,500 - 2,500
Chop Saws Table Saws Oscillating chop saws, table saws, robotic & manual foundry saws (Vulcan, Fox, etc.)

Reed UPC 616A, 636A and 648A (pneumatic and hydraulic): Arbor 5/8-7/8 bushing, Wachs Trav-L-Cutter: Arbor 1-1/4, 2 pinholes offset, Wachs UPC: Arbor 20mm, 1 pinhole offset, Wheeler Rex: Arbor 5/8-7/8 bushing. All blades can be machined to fit any tool requested.

spc