Ductile Iron Safety Blades

Hover over image to zoom

More images

Click to enlarge

Overview

#1 choice of water departments and underground utilities in the USA and Canada. Cuts almost anything. Made of solid steel (up to 14"), so it won't shatter or lose segments. Cuts and bevels: Ductile, cast, grey, angle and black iron; stainless, carbon, hardened, mild and galvanized steel; non-ferrous materials like bronze, copper, chrome, zinc and lead; high nickel-content materials; Hastelloy "superalloys"; schedule 40 and 80 pipe; PVC; HDPE; RCP; clay and ceramic pipe; cured, green and reinforced concrete; asphalt; brick; block; stone; granite; pavers; ceramic tile; wood; plywood; 2x4s; and more.

Price: $0.00

Purchase

Price and Size

Quantity

The selected item is out of stock, please select a different item or combination

1 review(s)

Please complete this form.
All fields are required.

Your name

Your email address

Your friend's name

Your friend's email

Description

Desert Diamond Industries is proud to present the safest, longest-lasting and most cost-effective diamond blades ever made - Ductile Iron Safety Blades.

The Ductile Iron Safety Blade cuts ductile iron, cast iron, gray iron, angle iron, black iron, concrete, asphalt, stone, brick, block and almost anything else you can put in front of it. That's because we poured years of research and development into its innovative solid steel design (up to 14" diameter) and vacuum-brazed diamond technology, so that it can cut almost anything while eliminating potentially fatal shattering and segment loss.

The Ductile Iron Safety Blade is covered by our signature Life Time Operator Error Warranty, so you can cut almost anything without worrying about your blade warping, wobbling or cracking from normal use.

How many handheld saw blades can cut through a 160-pound cast iron manhole cover? The Safety Blade can.

Most blades will lose segments if you hit them with a hammer. Not the solid steel Safety Blade. It bends, but doesn't break!

Ductile Iron Safety Blade Field Test

Desert Diamond Industries tested the Ductile Iron Safety Blade against our competitors' blades to document its longevity and performance under extreme conditions.

Goal: Run each blade non-stop until it completely burned up
Where: Our facility in Las Vegas, NV
Test Material: 4-inch cast iron mains using a 3,900 RPM table/chop saw, cutting with a dry blade
Expectations: 1,100 cuts with the Ductile Iron Safety Blade

Ductile Iron Safety Blade Test Results
Blade Test	Ductile Iron Safety Blade	Competitor #1
Time Spent Cutting	16 hours	16 hours
Number of Cuts	1,558 (34% more cuts!)	1,160
Blade Status After Cuts	Blade looks new and cuts like new!	Blade is dull and unusable

Ductile Iron Safety Blade Benefits

Outlasts Abrasive Blades: You'll go through 150 good quality abrasive blades - costing $4 to $10 and totaling $600 to $1,500 - before you'll wear down just one of our Ductile Iron Safety Blades.
Keeps Saw Operators Safe: Ductile Iron Safety Blades are made of solid steel (up to 14") to eliminate fatalities from blade shattering and segment loss.
Reduces Sparks: Ductile Iron Safety Blades generate 90% less sparks than abrasive blades during cutting and beveling
Reduces Health Insurance Costs and Lost Time: Ductile Iron Safety Blades don't generate hazardous dust during cutting and beveling, unlike abrasives.
Reduces Time Spent on the Job: Ductile Iron Safety Blades' vacuum-brazed diamond segments let you bevel as well as cut, reducing tool swaps and speeding work.
Prevents Warping and Wobbling: Ductile Iron Safety Blades' Air Flow Technology helps dissipate heat during continuous use.
Reduces Binding During Cuts: Ductile Iron Safety Blades' electroplated swirl design helps prevent binding.
Ecologically Friendly: Ductile Iron Safety Blades are 100% recyclable steel, unlike abrasive blades, which are 100% waste.
Life Time Operator Error Warranty: Ductile Iron Safety Blades come with the most comprehensive warranty in the industry and are warrantied for life against any and all damages.

Ductile Iron Safety Blade Specifications

Segment Height: 0.315" (8mm)
Diamond Content: 85% vacuum-brazed diamond content
Segment Weld: Made of solid steel with no welded cutting segments (up to and including 14"), laser-welded to steel cores (16" and larger)
Wet/Dry Cutting: Can be used for both wet and dry cutting

Ductile Iron Safety Blades Have Been Successfully Proven On:

Ductile, cast, grey, angle and black iron.
Stainless, carbon, hardened, mild and galvanized steel.
Schedule 40 and 80 pipe, PVC, HDPE, RCP and clay and ceramic pipe.
Non-ferrous materials like bronze, copper, chrome, zinc and lead.
High nickel-content materials and Hastelloy "superalloys".
Cured, green and reinforced concrete.
Asphalt
Brick, block, stone, granite, pavers and ceramic tile.
Wood, plywood and 2x4s.

Who Uses Ductile Iron Safety Blades?

#1 choice of water departments and underground utilities in the USA and Canada. We are the largest supplier of government agencies in North America.
Preferred blade of unionized training centers and educational institutions in North America.
Desert Diamond Industries is the largest diamond blade supplier to governmental agencies in North America.

Put it in front of the Ductile Iron Safety Blade, and the Ductile Iron Safety Blade will cut it.

Life Time Operator Error Warranty

With over 20 years of experience in the diamond blade industry, we want to provide only the best products and services available. This is why we offer the only Life Time Operator Error Warranty in the industry... because if your blade breaks, you should not be left holding the bag.

Recommended Products

Saws - All

Husqvarna K760 Fire Rescue Gas Saw Cuts up to 4" deep. Lighter and more maneuverable than the Husqvarna K970 Fire Rescue Gas Saw. Fire rescue saw made for firefighters, EMTs and other emergency services and emergency response personnel. For forcible entry, vehicle extrication and USAR, especially with the Fire Rescue Safety Blade. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.	Husqvarna K760 Cut-n-Break Gas Saw Gas saw step cuts trenches and grooves up to 16" deep for pipes, conduits, fiber optic and IT cabling, expansion joints, crack control, doors and windows. The Husqvarna K760 Cut-n-Break Gas Saw uses special twin 9" wet-cutting blades for cutting in concrete floors and slabs, pavers, block, stone, brick, masonry and other building material.	ICS 680GC Concrete-Cutting Gas Chain Saw For weekly cutting of concrete, masonry and stone. Makes square cuts up to full length of guide bar (up to 14"). The ICS 680GC Concrete-Cutting Gas Chain Saw comes with a TwinMAX guidebar and one 12" TwinMAX chain or two 14" TwinMax chains, which are designed for everyday cutting on natural stone, medium concrete and concrete with light reinforcement.
Husqvarna K970-14" Gas Ring Saw Cuts up to 10" deep, twice as deep as other 14" hand-held saws. Designed for ring saw blades.	ICS 695F4 Concrete-Cutting Gas Chain Saw For semi-weekly, heavy duty cutting of concrete, masonry and stone. Makes square cuts up to full length of guide bar (up to 16"). The ICS 695F4 Concrete-Cutting Gas Chain Saw comes with a FORCE4 guidbar and one 15" ProFORCE chain, which is designed for heavy cutting on natural stone, medium and heavy concrete and concrete with light and heavy reinforcement.	Husqvarna K970-14" Gas Saw Cuts up to 5" deep. More powerful than the Husqvarna K760-14" Gas Saw. Made for general purpose cutting in blacktop, concrete, brick, block, iron and steel. Easily converts to a walk-behind saw with the Husqvarna KV970/K1260 Cutting Cart. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.
ICS 695GC Concrete-Cutting Gas Chain Saw For semi-weekly, heavy duty cutting of concrete, masonry and stone. Makes square cuts up to full length of guide bar (up to 16"). The ICS 695GC Concrete-Cutting Gas Chain Saw comes with a TwinMAX guidebar and one 14" or 16" TwinMAX chain, which is designed for everday cutting on natural stone, medium concrete and concrete with light reinforcement.	ICS 814PRO Concrete-Cutting Hydraulic Chain Saw Light hydraulic chain saw designed for semi-weekly use. Cuts openings as small as 3.5 inches. External hydraulic power pack (sold separately) reduces saw noise and fumes. The ICS 814PRO Concrete-Cutting Hydraulic Chain Saw comes with a TwinMAX guidebar and one 13" TwinMAX chain, which is designed for everday cutting on natural stone, medium concrete and concrete with light reinforcement.	Husqvarna K1260 14" Gas Saw Designed for heavy duty everyday use. 14" model cuts up to 5" deep, while 16" model cuts up to 6" deep.
Husqvarna K760-12" Gas Saw Cuts up to 4" deep. Lighter than the Husqvarna K970-14" Gas Saw. Good for tight spaces. Easily converts to a walk-behind saw with the Husqvarna KV760 Cutting Trolley. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.	Husqvarna K760-14" Gas Saw with OilGuard Cuts up to 5" deep. Uses OilGuard oil to prevent engine failures in dusty, dirty environments, like construction, road, landscaping, recycling and utilities worksites. Easily converts to a walk-behind saw with the Husqvarna KV760 Cutting Trolley. OilGuard oil sold separately. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.	Husqvarna K760-14" Gas Saw Cuts up to 5" deep. Lighter than the Husqvarna K970-14" Gas Saw. Good combination of power, versatility, maneuverability and user friendliness. Easily converts to a walk-behind saw with the Husqvarna KV760 Cutting Trolley. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.
Husqvarna K970 Fire Rescue Gas Saw Cuts up to 5" deep. More powerful and deeper cutting than the Husqvarna K760 Fire Rescue Gas Saw. Fire rescue saw made for firefighters, EMTs and other emergency personnel. For forcible entry, vehicle extrication and USAR, especially with the Fire Rescue Safety Blade. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.	Husqvarna K1260 Rail Gas Saw Gas saw for repair of train, railroad, railway, subway and tram track and rail. Comes with cutting attachment for fast, accurate cuts. Cuts up to 6" deep.	ICS 880F4 Ductile Iron Pipe-Cutting Hydraulic Chain Saw Workhorse chain saw designed for daily cutting. Makes square cuts up to full length of guide bar (up to 25"). External hydraulic power pack (sold separately) reduces saw noise and fumes. The ICS 880F4 Ductile Iron Pipe-Cutting Hydraulic Chain Saw comes with a FORCE4 guidebar and one 15" or 20" PowerGrit chain, which is designed for ductile iron pipe, cast iron pipe, PVC pipe, HDPE pipe and Insituform pipe lining, or one 15" ProFORCE chain, which is designed for heavy cutting on natural stone, medium and heavy concrete and concrete with light and heavy reinforcement.
Husqvarna K3000 Cut-n-Break Electric Saw Electric saw step cuts trenches and grooves up to 16" deep for pipes, conduits, fiber optic and IT cabling, expansion joints, crack control, doors and windows. The Husqvarna K3000 Cut-n-Break Electric Saw uses special twin 9" wet-cutting blades for cutting in concrete floors and slabs, pavers, block, stone, brick, masonry and other building material.	Husqvarna K970-16" Gas Saw Cuts up to 6" deep. More powerful than the Husqvarna K760-14" Gas Saw. Cuts deeper (with a 16" blade) than the Husqvarna K970-14" Gas Saw. Easily converts to a walk-behind saw with the Husqvarna KV970/K1260 Cutting Cart. Now covered by Husqvarna's 1-year Gold Medal Equipment Warranty.	Husqvarna K40 Pneumatic Saw Powered by an air compressor. Cuts without exhaust. Designed for cutting indoors or in areas where ventilation, dust or air quality are a concern. Cuts up to 5" deep.
Husqvarna K3000 Vac Electric Saw with Vacuum Attachment Electric saw with vacuum attachment for dust control. Use for cutting indoors and where air quality is a concern, like homes and schools. Comes with vacuum attachment. Vacuum sold separately. Cuts up to 4.5" deep with vacuum attachment.	Husqvarna K3000 Wet-Cutting Electric Saw Wet-cutting electric saw produces no fumes and less noise than gas hand-held saws. Great for cutting indoor or where noise and air quality are a concern. Cuts up to 4.9" deep.	ICS Hydraulic Chainsaw Power Packs and Hoses for ICS Hydraulic Chain Saws Hydraulic chainsaw power packs for ICS 814PRO and 880F4 hydraulic chain saws. *Required equipment for the ICS 814PRO Concrete-Cutting Hydraulic Chain Saw and* ICS 880F4 Ductile Iron Pipe-Cutting Hydraulic Chain Saw.
Husqvarna K2500 Hydraulic Saw Lightweight, portable hydraulic saw that's also durable and tough. Powered by an external hydraulic power pack, so it emits no fumes or exhaust. For counstruction, building and cutting where ventilation or air quality is a concern, such as indoors, undergound or in sewers and trenches. Cuts up to 6" deep.	ICS 695F4/PG Ductile Iron Pipe-Cutting Gas Chain Saw For ductile iron pipe, PVC pipe, cast iron pipe, HDPE pipe and Insituform pipe lining. Makes square cuts up to full length of guide bar (up to 16"). The ICS 695F4/PG Ductile Iron Pipe-Cutting Gas Chain Saw comes with a FORCE4 guidebar and one 16" PowerGrit chain, which is designed for ductile iron pipe, cast iron pipe, PVC pipe, HDPE pipe and Insituform pipe lining.